Any give me some tips?


I have removed the screws in,

Door pull indent, air con vent hole, behind the handle itself


any other i cant find and how do you pull it off?



Any help ASAP will be good. I have to drive 3hrs now and its gonna rain. Busted P/S electric window and the window is down atm.

hey mate, hope this helps
http://img30.imageshack.us/img30/1505/doorremoval.jpg
think you just remove them in order.. screws at 1,2 and 3, then the delta cover/tweeter cover, screw at 5, and then the door trim should come off

No need to remove number 3
Remove the screw behind the handle and the cover surround itself (pull towards front of car and should unclip)
Remove screw from round air con vent
Look in finger grip and you should see a small cover bit, get a small flat head and pop this cover off. Will then be a screw behing the cover, remove the screw
Feel roughly center under the door till you find a small gap big enough to grip the trim, start pulling the trim towards you as its only clipped in
Depending if you have power windows or curtasy lights then unclip and remove harness/lights if nessecary

As for putting it back on its the same as above in reverse, I found it easy to put the trim back on with the windo down (which in you case it is lol)
Place roughly back in the same spot and start tapping around the trim with your hand, you should hear it clip back in
Replace screws and your done

Thanks guys.


got it done.


Window motor sounds like its going but the window wont move.

There is a long metal wire loose that i think should be connected to something...not a power wire but a mechanical wire if u know what i mean.

will have a better look tommoz