God i feel like i spam the 2nd gen thread...
Anyway,
Just curious what the stock ground clearance is on a KS. Legal minimum is 100mm and im looking into lowering, just want to make sure :D

Thanks!

I'm 99% sure that if you slap a set of king lows on it you'll still be running at a legal height dude.

Well, Brian you seen my car the other day... The arse end is slammed by 80mm and its still 120mm off the ground! So I think you'll be find on Lovell Superlows.

stock ground clearance on a 2nd gen is about 5km. even if you went retarded like we did with mine, it would still be at about 80mm

Well, Brian you seen my car the other day... The arse end is slammed by 80mm and its still 120mm off the ground! So I think you'll be find on Lovell Superlows.

Dean just remember a 3rd gen underbody differs from a 2nd gen heaps. I've got mine on superlows up front and compressed low's at the back and I hardly scrape on anything, I still scrape, but higher 3rd gens will scrape on the same inclines etc.
Low's will be fine, But you'll wanna go lower...

is there any company in australia that makes springs for a ts magna lower then 40 mm ????? i want LOW LOW !!!

is there any company in australia that makes springs for a ts magna lower then 40 mm ????? i want LOW LOW !!!
A shop here in rockhapton makes them so im sure they will i can find out u if u need to

oh wicked. any idea what the shops called ?? mite give them a call. i cud drive down to pick them up

i think its auora or something like that. They make jade coloured springs i beleive. Pretty average price but i beleive the benefit is you can ask for a specific drop, i remember the ad even stating up to 100mm drop. On the rear of a 2nd gen 40mm lower will only just be captive in the spring seat on the shockie. You can go lower on the springs but i would definatley go stiffer then most aftermarket items.

what do u mean by 40mm lower will only just be captive in the spring seat on the shockie?

you will be safe with superlows.

oh wicked. any idea what the shops called ?? mite give them a call. i cud drive down to pick them up

Dobinsons is the name.

K-Mac do custom springs as well. I've heard that King Springs will make custom springs but I couldn't find any info on their website to confirm it.

yeh. i heard that the front springs out of a third gen will fit the front of a second gen? anyone know any truth behind this? ive put in the pedders springs and they are an awesome ride but i still want the front to be lower :/ the back is sitting nice and low

yeh. i heard that the front springs out of a third gen will fit the front of a second gen? anyone know any truth behind this? ive put in the pedders springs and they are an awesome ride but i still want the front to be lower :/ the back is sitting nice and low

3rd gen front struts will fit a 2nd gen. rears wont

do king springs make superlow springs for the front of third gens?

They do but as you will see in the forsale section, mant are removing them and replacing with lows

Is not so much ground clearance, it is the lack of suspension travel that is the issue with super lows

Dobinson's Spring & Suspension(07) 4927 7444
58 Hollingsworth St
North Rockhampton QLD 4701