Can anyone here help me out. I have the chance to get myself some Galant VR4 brakes front and rear for the TL and i was just wondering if they are a bolt up fitment?

Many thanks.

AFAIK, YES, this is what I am putting on my magna. If you can wait about 1 week I will have full specs and what not about how this all goes.

Excellent. I look forward to your response!

Dave, these are the specs for the stock VR4 brakes:

Original Rotor Dimensions:
Front Diameter 294mm
Original Height 46mm
Original Thickness 24mm
Minimum Thickness 22.4mm
Centre Hole Diameter 69mm

Rear Diameter 284mm
Original Height 60.2mm
Original Thickness 20mm
Minimum Thickness 18.4mm
Centre Hole Diameter 90mm

The DBA part numbers are DBA417(F) & DBA429(R), which are the same part numbers as the AWD. the mounting points for the brakes are the same as the EVO 6-9 Brembo's are interchangeable on both cars, leaving you with only 2 worries.

Will you need a spacer at the rear & will your existing hoses or the hoses you're getting suffice. I have a set of spacers plus hoses here if you need for test fitting before carrying out the conversion.