Hi all..
myTH advance has about 136xxxk on the clock with factory springs,
would i notice much if i changed the springs over to VRX springs that have only done 40xxx k's?
and it's only going to be a small drop too right?... about 10mm?

should i do?

My understanding is the VR-X Springs are slightly stiffer, and may lower the overall height a little. (I think from the brochure for the TW the VR-X was 5mm lower). Are you replacing the shocks / Struts at the same time?

VR-X springs are 10mm lower.

By 136k I'd be looking at replacing the shocks too if you're going to play around with the suspension.

ok, i'm running through some options at the moment..
so it's only a small drop, but will give a firmer ride...