Because too many people ask me how i did it here is a few steps!
First remove headlight from the car, take the globes out and put it in the oven on high temp for COUPLE OF MINUTES!!!
http://www.aussiemagna.com/forums/attachment.php?attachmentid=42756
http://www.aussiemagna.com/forums/attachment.php?attachmentid=42748
After couple min. take the head light and with a screwdrive try to undo the clips and then pull the glass apart from the head lights
http://www.aussiemagna.com/forums/attachment.php?attachmentid=42754
http://www.aussiemagna.com/forums/attachment.php?attachmentid=42745

Then undo the mirror from the glass and put the angel lights on the spots where the mirror goes
http://www.aussiemagna.com/forums/attachment.php?attachmentid=42752
http://www.aussiemagna.com/forums/attachment.php?attachmentid=42747
http://www.aussiemagna.com/forums/attachment.php?attachmentid=42753

Then catch the mirror back with the screws not to firm! Put the glass back and chuck the headlight back in the oven for couple min again to mould the glue, then put silicone let it dri and is ready to go back in the car! Connect the wiers to the parkers lights and make sure they are working in good order before to bolt the headlight in. Good luck! Any questions pls ask!

nice, i have been meaning to do this thanks mate!

one question, where do you get the angel eyes from?

E. bay!

What size angel eyes did you get?

I think I used the bmw e36 ones in mine?

good mod mate. i'll either get those or strip LEDS.

can anyone clarify what BMW angel eyes you need to get them out of?

I think for BMW ones you need a HID conversion.

What size angel eyes did you get?

I'm pretty sure it's 90 cm. I asked for bigger but they didn't have any.

http://cars.shop.ebay.com.au/Car-Truck-Parts-/6030/i.html?_trkparms=65%253A10%257C66%253A2%257C39%253 A1&rt=nc&_nkw=led%20rings&_catref=1&_dmpt=AU_Car_Parts_Accessories&_trksid=p3286.c0.m14.l1581&_pgn=2

I'm pretty sure it's 90 cm. I asked for bigger but they didn't have any.

90cm? you must have a very big headlight then ..?

again, can anyone clarify exactly wich ones fit?

One piece it is the 130mm BMW ones and for the two piece,110mm is the largest that will fit in there.

The designs of the shrouds are different between the two set ups and the 130 BMW WONT fit the glass two piece ones.

Can you give a link to this product :)

One piece it is the 130mm BMW ones and for the two piece,110mm is the largest that will fit in there.

The designs of the shrouds are different between the two set ups and the 130 BMW WONT fit the glass two piece ones.

It fit pwn3d_69er's car okay though? Almost perfect like the one piece ones?

http://www.aussiemagna.com/forums/showthread.php?t=87261&page=7

That's the start of what I did for my angel eyes at the bottom

Just an idea on how to fit 130mm rings in

Hey guys iv got 1 peice parra's on my 02 tj vrx... now im absolutely terrible with this sort of stuff...

can anybody calrify exactly what sort of Angel eyes i need in terms of diametre and what not... i dont really want to get it wrong haha.

130mm I believe is what MR SPL and I got, check the link about if thats what you want and I'll send you the eBay link for them

Done and done, i want them haha only down side is i have HID's in my low beams so u wont see the eyelids when they are on haha only the 1's around the high beams.

Sorry,but now im really confused.I was only relaying the info about the BMW ones not fitting in the two piece ,because i git that info from a "life " member here.

Seeing as it fit in pwn3d_69er's car ,and he has the tow piece,then it must mean that the BMW E36 style will fit in both lenses.....go figure,see,you cant always relie on what people tell you.

Sorry,but now im really confused.I was only relaying the info about the BMW ones not fitting in the two piece ,because i git that info from a "life " member here.

Seeing as it fit in pwn3d_69er's car ,and he has the tow piece,then it must mean that the BMW E36 style will fit in both lenses.....go figure,see,you cant always relie on what people tell you.


The set i have are currently on my 2 piece, and in MR SPl's 1 piece

Only difference angel eyes wise is that you can see all of the ring in the 1 and cut off the side ever so slightly on the 2, but still look great

Yes Maggie they are E36


I'll post the link in a tick tubby

Can't do the link from my phone, won't work

Just type in BMW E36 coupe CCFL bright white angel eyes 6000K, there 69.99 in vic

http://www.ebay.com.au/itm/BMW-E36-Coupe-CCFL-Bright-White-Angel-Eyes-6000K-/250826002102?pt=AU_Car_Parts_Accessories&hash=item3a66650eb6

im assuming they are the one's and they will fit in my car without having cut chop or change anything???

Yes they will fit in either 1 piece parras or 2 piece parras, I'll be going to the wreckers this weekend to get a few parker connectors and do a proper job, I could make a DIY thread if you would like?

yea if you could it would be awesome... as iv no idea what im doing especialy with putting my headlights in the oven... that scares me just a little bit...

Well I have work tonight, I'll probably do it when I finish work or tomorrow arvo and send you the link

awesome mate cheers, yea ovening my headlights is scary haha

Yep correct :) I have to say the 131mm rings with the one and two piece parras perfect :)

http://i1033.photobucket.com/albums/a416/hdach3/DSC00463.jpg

http://i1033.photobucket.com/albums/a416/hdach3/DSC00467.jpg

Link for the ones i brought. Im happy with them but any 131mm rings will do fine

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=250826002103

Hey guys

i just bought a set of BMW E36 coupe CCFL bright white angel eyes 6000K
if any1 could do a step by step it would be much appreciated... as ovening my headlights is a duanting task.

Check out my build thread mate :) Some sort of DIY in there

This is what the finished product looks like :)

http://i1033.photobucket.com/albums/a416/hdach3/DSC00608.jpg

http://i1033.photobucket.com/albums/a416/hdach3/DSC00605.jpg

Two piece parras on left car and my car on right has the one piece parras. Bit off a difference in bezel size but still looks good :)

ok so maybe im blind but i cant find it :S

Few pages back? shows taking lights and everything out?

Post #219