I am looking for anyone who has done this mod. I have fitted the updated TL console with vents, but I am having trouble fitting the factory ducting to connect it all up. Hoping someone has done this. The issue seems to be getting the ducting to fit in around the shifter area.

Any advice or pics would be appreciated.

I am looking for anyone who has done this mod. I have fitted the updated TL console with vents, but I am having trouble fitting the factory ducting to connect it all up. Hoping someone has done this. The issue seems to be getting the ducting to fit in around the shifter area.

Any advice or pics would be appreciated.

I am looking at getting it done soon on my KJ2. Hopefully it will go alright.

Check with The Magnaforce. He have done it before.

I have done this in my TE, found that the heater box is slightly different and if you are trying to fit these to the pipe that the floor vents fit to then there is your issue as the ducting for the TL goes up the front of the heater box and merges in with the top vent section, hard to explain but when you see it then you know what i mean

In the end I used the complete TL fan, aircon and heater boxes, this way I have the correct fitment and allignment