Heys Guys and Gurls, Just woundering if anyone can provide me with a "how to" on removing the front door trims on a Tr. As i am installing my new Focal 5" splits soon :D , any help would be great.

Cheers Jono

Quick seach reveals this thread on the 2nd page ;)
http://www.aussiemagna.com/forums/showthread.php?t=2750

I copied and pasted my post from it for you

2 screws in the side of the trim
3 screws where the air vent part is, the area that gets covered by dash
1 screw hidden behind the handle part of the arm rest (need to pop open the cap)
1 screw in the underside of the arm rest
Undo the retaining clip for the window winder *slide a rag behind it and work it back and forth till it comes out*
1 screw holding the inner door handle behind the little cover plate, there's a slot to put the screwdriver in, slowly work that out and then undo the screw. Push the handle to the back of the door and it'll come loose. You then undo the clip holding the handle cable in and slide it out.

Then you pull the bottom of the trim and the clips should all undo (4 in total I think), then you hold the door by the armrest handle and lift it up, I lift from the back of the door first, it's easier, just be careful not to crack the trim when taking it out under the mirror
Hope that helps!

Thanks for that should help :D