AS stated above hazards and indicators no longer work, I've checked the relay it looks to be in good nic i've checked the plugs are all in (hazards plug and the one leading to the back of the indicator stalk)
What else can i check. It's important that i get this fixed cause i have to get to our cruise on sunday and will be driving around alot of sydney tomorrow. Kinda hard to do without indicators...

happened to mine had to replace the hazard button. and everything worked agian

ah. might borrow one of someone whos dash is dissasembled and test that. got the indicators working again. was a hairline crack in the fuse filament A quick look and i missed it but spending a minute there i was able to see it. There where no black marks and no gaping hole it was just a tiny crack. bloody car wants me to go insane.

AS stated above hazards and indicators no longer work, I've checked the relay it looks to be in good nic i've checked the plugs are all in (hazards plug and the one leading to the back of the indicator stalk)
What else can i check. It's important that i get this fixed cause i have to get to our cruise on sunday and will be driving around alot of sydney tomorrow. Kinda hard to do without indicators...

You wouldn't be any different to the other sydney drivers (mainly taxis lol).

Check the fuses as well, and replace the relay with one you know works just to make sure. Failing that try the hazard button (or even as a test, ground the hazard power input to see if it kicks in).

If the indicators are working, so will the hazards.

As M4DDOG would know from my experience, the indicators wont work unless the hazards are working =)

I know one should work without the other but... Well i've got the indicators going again lmao. It's likely just a problem with the button since they all run off the same fuse and relay as far as i can tell.

Well would be weird if they werent because the hazards are before the indicators in the circuit, wouldnt make sense that the indicators would work and not the hazards :S

Well would be weird if they werent because the hazards are before the indicators in the circuit, wouldnt make sense that the indicators would work and not the hazards :S

It's possible the switch is broken, but the connection is still there. As opposed to it not being plugged in at all.

Argh now i have no dash lights and my parkers keep blowing their fuses this is not my day lol

Ok i fail... I was looking for blown fuses in the engine bay i can't figure out why the parking lights keep blowing but i found out why the hazards where gone i didnt realies there was a fuse for it in there. well that's fixed now to find out why the parking lights dont work