At the title suggests im looking into making the parras compliant by actually putting Parkers in them.

Now for the once piece parras it recommends a T4W Globe that fits in the cutout provided.

My question is do i need a globe holder for these?

Or can i just simply solver some wires onto the pins on the side of the globes? I am thinking not since it looks like the power is provided through the base.

Don't what sort of Parra's you have but the rest of us have parkers in our Parra's.. (well at least I do)

Don't what sort of Parra's you have but the rest of us have parkers in our Parra's.. (well at least I do)

Verada ones have parkers lower down on the front bumper instead of in the parras themselves :)

I had this issue with some one peice parra's for the TE.

I had a relay connected and wiring up of the pins to a different type of globe (H4) i think was used from memory. I cant remember exactly as this was done by my local workshop when i was getting rego for the TE. I can ask them and come back to you if you like or just have a look at the wiring and globe used when i get home and send you a pic? Let me know

Thanks

Ah I stand corrected, in that case I would assume you would need globe holders for them if only to hold them in place.

When we did ghost's para's we used the standard headlight Parker and wiring, took out the Parker light plug, and slotted it straight in. Worked a treat

When we did ghost's para's we used the standard headlight Parker and wiring, took out the Parker light plug, and slotted it straight in. Worked a treat

Excellent now i just need to go to U Pull it lol.

Figured it out, info is in my build if anyones interested.