hey all i need to know what rims i can use from a ford for my 95 magna ts i know the ef ones will fit but the offset is way off

any help will be nice

http://forums.justcommodores.com.au/attachments/general/8642d1132210042-fpv-f6-turbo-typhoon20wheel2-2.jpg

http://t2.gstatic.com/images?q=tbn:ANd9GcR-fieE6a-7IIuqy01n_CDCCNfYrPyxdjSLtdeHfncjQo1WhrBq&t=1
these have always been a favourite.

ba xr6 wheels fit perfect aswell.

AU onwards I think, and from memory around +35 offset for magnas.

Any wheel that has stud patters 5x114.3 I used to have +45 offset and 8-inch wide rims rubbed when at full lock. Offset of +35 with 7.5 inch wides makes no problems whatsoever.

RussianMax. Did the wheels rub the guard lip or the chassis/suspension?

ba xr6 17's look sweet on a magna but any 17 inch alloy from the ba-fg look good on any magna

cheers mate and sorry for posting this in the wrong section it was ment for the 2nd gen tr ts section lol

cheers mate and sorry for posting this in the wrong section it was ment for the 2nd gen tr ts section lol

These 19s would look HOT on a TS Magna.
http://forums.justcommodores.com.au/attachments/general/8642d1132210042-fpv-f6-turbo-typhoon20wheel2-2.jpg





P.S. i just moved it for you.:)

I think they'd cost more than the TS magna, bt yeh, if you could find some bigger brakes to fill the centre up a bit from standard magna brakes they'd look great.

Any wheel that has stud patters 5x114.3 I used to have +45 offset and 8-inch wide rims rubbed when at full lock. Offset of +35 with 7.5 inch wides makes no problems whatsoever.

Not necessrily. Pre AU had very small offset so it will protrude the guard. There is also the hub diameter which needs to be same size or bigger.

ford hub is bigger then magnas but yes if you use falcon rims you need from after AU onwards due to offset issues. having said that though, this only is stock falcon wheels. any aftermarket wheel with 5x 114.3 spacing, a 60mm*** centre bore (hub space) or more and offset if 25-45 on a 7"or 35-50 on 8" rim somewhere in those ball park figues. 8"with 35ET offset is flsuh with the gaurds on the front and about 5-8mm inside the gaurd on the back. Probably best fitment possible without staggered offset wheels. You can go 2 inches lower without rubbing.