i recently put in a headunit then the indicators stopped working plugged the hazards in then the blinkers worked, disconnected a second time to finish off the headunit job then reconected the hazards and the blinkers didnt work tried taking out the hazards then put it back in several times and still doesnt work... is it the realy fuse?

Wait..slow down.

1. You installed a headunit.
2. The indicators stopped working at some point after you installed the headunit. Did they work for a period of time after the install but before they failed?
3. You then plugged the hazards in....What does that mean? The wiring, the switch, the relay, the flasher can? At which stage the indicators worked..?
4. You disconnected something else to and then reconnected the hazard lights and now neither your hazard lights nor your indicators work.
5. You suspect it may be a relay or a fuse.

Is this correct? I had a bit of a hard time following what you've written.

Sounds like you've blown the hazards fuse.

Wait..slow down.

1. You installed a headunit.
2. The indicators stopped working at some point after you installed the headunit. Did they work for a period of time after the install but before they failed?
3. You then plugged the hazards in....What does that mean? The wiring, the switch, the relay, the flasher can? At which stage the indicators worked..?
4. You disconnected something else to and then reconnected the hazard lights and now neither your hazard lights nor your indicators work.
5. You suspect it may be a relay or a fuse.

Is this correct? I had a bit of a hard time following what you've written.

During a head unit install you unplug the hazards switch, with this unplugged the indicators do not work. I've done it a couple times myself... Just don't plug it back in while "on" or you've got a chance at blowing the fuse.

1. i installed the headunit
2. plugged the hazards back into the main fram switch
3. tried the hazards worked as normal
4. tried the blinkers and they didnt work at all

thatnks life.. do u know how much a mechanic would charge to replace that?

Grab some mini wedge fuses from a servo and DIY :) there are 2 fuse boxes, they are fairly self explanatory... Just look for the indicator icons. Fuse boxs are by your right foot, and in the engine bay next to the airbox.

Where in NSW are you?

aw ok i thought the problem wasnt in the fuse box so thanks for ur help.
i live in cronulla sydney

its like the seperate kind of black small box ur talking about tho

The little black cover with lots of pictures on it for the drivers kick
The box black box with lots of pics above the battery for the engine bay

There is a fuse puller inside the cover for the drivers kick, makes it easy to remove the fuses.

is there any where else then a servo u can buy them from like supercheap autos

Supercheap, Repco, Autobarn, etc.. all have them, just make sure to replace any blown fuses with one of equal rating.

thanks so much for ur help

Oh, also attempt to unplug-replug the hazards, may just be loose?

ok thanks again :)

Need more clues and model make and year? Also did you plug the hazard switch back into the main wiring loom?