hey guys..can anyone tell me roughly the process for replacing all 6 plugs on a ralliart magna..degree of difficulty... cheers guys

90degree bend on intake after the throttle body needs to be removed
4 bolts that screw into the intake manifold that hold the throttle body to the manifold need to be removed
throttle cable bracket that is bolted to the back of the manifold in the center needs to be removed
vaccume hoses, one next to the throttle body coming out of the manifold at the back one ontop and one facing towards you need to be removed
a couple of brackets that hold the electrical plugs to the manifold (dont know what they are called) take them off
and 6 bolts that hold the manifold down onto the lower intake manifold remove them
lift the manifold up and keep it square when removing
throw a rag over the lower intake so you dont drop anything in there
pull the spark plug leads up and remove them
undo the plugs and replace

Not difficult just take your time and take note of where each bolt came from...

this guide is for a tf magna yours may differ slightly

Only difference with the Altera and Ralliart would be taking the engine cover off

thnx Altera...sounds reasonably straight forward..