Looking at some new 19", offset is +35 the wrecker thinks, 19"/8"
There off a BA XR6, there wrapped in maxxis 245/35ZR19 93W, how much would these effect my speedo? I put them next to my enkies and they stood a bit taller (going by top of the tread)

I'm at stock height ATM will lower on king lows, will I have scraping issues at all?

Cheers

They shouldn't affect your speedo much at all ( less than 1% difference in diameter ).

The 35 offset may put them just outside the guards though. Mine are 19x8 42p offset

Hmmm, may go to the wrecker and test fit on the front I think

They'll stick out at the front & rub on the guard at the rear. Neg camber may be able to fix both - depends how much you want them I guess?

Also, note that the tyre load rating is illegal for any Magna - it needs to be a minimum of 94, depending on your model.

I think you have a wagon?

From the experience I've had in my TH wagon they seem to have a bit more clearance (at least at the rear).

I had 19" x 8" with a +35 offset rims fitted with 245/35/19. I have low king springs as well.

I found there was very light scrubbing on the plastic inner guard at the front, only at full lock, and the rear were fine.
The fronts were borderline with sticking out the guard.

See if this image works below to show you where they sit.
http://picturestack.com/612/537/RX5IMAG0099NoP.th.jpg (http://picturestack.com/612/537/RX5IMAG0099NoP.jpg)

I think Jamie's (mr spl) has the same offset, so have a look at where his sit

I think Jamie's (mr spl) has the same offset, so have a look at where his sit

his sit out the guards, im sure he will see this when he gets home to confirm:)

My Rims have 35 offset and sit flush with the guards.

But I cant lower the car otherwise it will destroy my flares.

http://img402.imageshack.us/img402/3037/p1120098.jpg

http://img232.imageshack.us/img232/3987/pic12ss.jpg
Boost

i had 19 x 8.5 +35 offset on my tj vrx on king lows, no problems whatsoever

pic below

http://www.aussiemagna.com/forums/attachment.php?attachmentid=42554