http://www.youtube.com/watch?v=BeS6iRPVSyk&feature=youtube_gdata_player

Can anyone help me out or experienced with this issue?

Thanks

Looks like the connector to those lights is a bit loose. Not sure exactly where it is, but it's most likely under the centre console somewhere.

my + flashes

The car keeps telling to go faster!!

Looks like the connector to those lights is a bit loose. Not sure exactly where it is, but it's most likely under the centre console somewhere.

+ 1
Or a loose/faulty globe. When someone pulls out the shifter, there is a connection to hook up the light right there.
If its not that, it could take a bit to trace.
There is a plug on the right hand side, but to have a bit of a poke around there, lift the centre console storage lid, and the lower console lifts easily, starting from the rear.
http://i254.photobucket.com/albums/hh110/caz375/380%20parts/DSCN0135.jpg

I had the same issue with some of mine also, replaced the globes and the flashing stopped, now all 3 globes are blown and I CBF'd pulling the centre console apart again lol

Did you put in regular globes, or did you try LED's, they may reduce the draw a little....

Thanks alot everyone for your input....until the rest of the lights start flashing like a disco cbf!

Did you put in regular globes, or did you try LED's, they may reduce the draw a little....

Yea same LED's were used T10 LED's from memory

ARRRRRRRRRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHHHHHHHHHH H mines doing it now

Are you sure they are T10 or are they T5??

ARRRRRRRRRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHHHHHHHHHH H mines doing it now

Shshhhhhh, Not so loud every one will want one.

Looks like its a common thing, I wonder if anyone had any warranty work on this to discover the fix.

Sparky.... Help......

BTW they are T5

Kif I am ordering a few from HK if you want to redo them
.

BTW they are T5

Kif I am ordering a few from HK if you want to redo them
.
Apologies for posting wrong kind, lock me in Warren. I'm keen

Tick Done!

Are the globes separate for P,R,N,D? Wouldn't mind getting a different color globe for R to match the R on the dash :)

No I'm sure there are just three globes

When i pulled the globe out to check which one it was, i only saw the 1 ? Can check again in the morning for you.

I dont have a 380 so I'm unsure on a fix,if it flashing like that could be a dirty connection/ lose wire. Bad batch of LED's might do it. Unsure would need to get my hands on a disco/ flashing 380 and a multimeter :)


As I would need to test weather the voltage being supplied is constant and then go from there :) Then test the lamp on a know good supply of power. By the end of testing I would knows the answer.

When i pulled the globe out to check which one it was, i only saw the 1 ? Can check again in the morning for you.

From memory there is one globe for the PRND and one each for the - & +

Of course :)