My KH Verada drivers window rattles when I shut the door if its wound down a little, is this because theres no frames or is theres something that can be done to stop it? guess this is a common problem with the 3rd gens, cheers

You could try pulling the door trim off and gently tightening all of the bolts securing the window glass to the window rail. You can get to all of the window bolts with a long extension and a 10mm socket.

bets bet is to pull to door card of and have a look

my TF did the same thing, i pulled the door card off, wound down the window, and just at the very top of the door as you look over the top, there is 3 bolts, i think, pull them out, 1 at a time, and put spring washers behind them, this could be your cause as well

Thanks so much for the tip on how to fix this problem Ziek, cheers



my TF did the same thing, i pulled the door card off, wound down the window, and just at the very top of the door as you look over the top, there is 3 bolts, i think, pull them out, 1 at a time, and put spring washers behind them, this could be your cause as well