I had a blown fuse which I have replaced but when the car is switched on I see only 1 4d code on the LCD on the dash where the odometer should display. Also can't reset the clock.

I tried disconnecting the battery for 20 seconds and re-connecting with no luck.

Also the 6-CD Radio now needs the code to be input. I know the code but don't know how to input all the codes, numbers up to 6 seem to come from the CD selector/radio channel but how do I input numbers above 6?

Much appreciated for any insight.

The 4d means AWD, press the up/down arrows together till you hear a double beep, it will then display 3.5, do the same again with the arrows, thats just so the ECU has reset and it knows what it is.
To set your clock, have the key set to ACC then use the up/down arrows to adjust the time.
As with the radio, I haven't had a stock radio in it for ages, so I don't know, plus my car is 3000km away with the book lol
Someone else on here will tell you.

The 4d means AWD, press the up/down arrows together till you hear a double beep, it will then display 3.5, do the same again with the arrows, thats just so the ECU has reset and it knows what it is.
To set your clock, have the key set to ACC then use the up/down arrows to adjust the time.
As with the radio, I haven't had a stock radio in it for ages, so I don't know, plus my car is 3000km away with the book lol
Someone else on here will tell you.

Thanks a lot.

I called the dealer in Werribee and they couldn't/wouldn't tell me how to reset the 4d code. I'm just glad it's nothing serious.

One again, Thanks!

You hold the mode button dont you??? thats what i did with mine.. Plus its what the guy from mitsu told me to do..