Just want to see if anybody has fitted a Short Shift kit to a TL or TW ?
Wanting to know how successful it was and the size that was used a 8mm or 10mm sign in.

Many have done this but I have NFI what you are asking about a 8 or 10mm sign in

Stupid phone mest up the spelling. 8mm or 10mm side pin? The RPW site asks this question begot you buy?

Just measure yours then you get the right size.

I'am not 100% were to measure from.

When you take of the top of your centerconsole push the gearstick to the drivers side and look down beside the gearstick on the passengerside you will see a cable that sits on a pin that sticks out at 90 degrees from bout half way down the gearstick that pin size is what you need to measure. Hope that makes sense.

Thanks mate that makes it a lot easier. definitely make sense lol.

I have driven cars with short shifters in them and hated them so if you can drive one with one installed first may be a good idea as you may not like the notchy feel you get as a result

hmm I thought I posted here.. found it -> http://www.aussiemagna.com/forums/showthread.php?t=96426&p=1514328&highlight=#post1514328