Like the title says, how do you remove the top wing part of a Ralliart Magna rear spoiler/wing?
I know I have to "pop" out the side panels - but they're a tight fit and don't appear to want to come out.
Anyone done this or know where the clips are so I know where to apply force without snapping the plastic bit?

there are no clips, the side plastics are glued with very strong double sided tape.
i would tape up all around the plastic bit with masking tape and lots of it then use a blunt chisel or something very thin and wedge it under the plastic pushing on the tape. slowly move it around cutting the double sided tape until the panel comes off.

try not to bend the plastic panel to much or it may crack, tape around it super well or you will scratch the paint.

Very hard job to do so just use patience and care and you should be fine. Also be careful not to scratch the inside of the wing when you pull the blade out as the stems of the studs stick out.

Do it on a hot day so the tape will be softer. Try pulling fishing line along thru the tape. Don't damage the wiring which exits at the rear right side.
The rear wing is a single unit, it doesn't come apart.